Char-Griller Flat Iron 8036 El Manual Del Propietario página 15

STEP 4A
1 x6
Loosen the top COUNTERSUNK
SCREW on the CONTROL PANEL
slightly (DO NOT remove it completely)
and screw in a COUNTERSUNK
SCREW at the top of the GRILL BODY
on the back side.
Insert the SIDE SHELF SUPPORT
BRACKET over the screw through
the keyhole and push the SUPPORT
BRACKET downward.
Secure the SIDE SHELF
SUPPORT BRACKET with another
COUNTERSUNK SCREW at the
bottom of the bracket.
STEP 4B
With the SIDE SHELF at a
downward angle, place the SIDE
SHELF cut out slots on the SIDE
SHELF SUPPORT BRACKET.
8036_OM_A.1
B-6
DETAIL A
A
SCALE 1 : 1