Char-Griller Flat Iron 8036 El Manual Del Propietario página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Read the following instructions carefully and be sure your barbecue is properly assembled, installed
and maintained. Failure to follow these instructions may result in serious bodily injury and/or property
damage. If you have any questions concerning assembly or operation, consult your dealer or LP
gas company.
When used, always place the appliance and gas bottle on flat level ground. Grill can be used with
20lb gas cylinder. This grill is designed to operate at an inlet pressure of: 11 inches water column.
DO NOT move the appliance during use.
DO NOT attempt to disconnect any gas fittings while barbecue is in use.
DO NOT use gas bottle if the bottle and/or valve are damaged, rusty, or dented as this may be
hazardous. Contact your supplier to have it checked.
DO NOT lean over an open grill and be mindful of hands/fingers near the edge of the cooking area.
Should a fire occur, turn off all gas burners, close the lid, and stand back from grill until fire is out.
Should flames go out while in operation, turn off all gas valves and leave lid open. Return to grill
after five minutes and try to relight the burners – following lighting instructions.
Keep children and pets away from grill when in use. Some parts of the grill will become very hot.
When cleaning the valves and burners, be careful not to stretch the valve orifices or burner ports.
Move gas hoses as far away as possible from hot surfaces and dripping hot grease.
Gas may still be present in a cylinder that appears to be empty. Adhere to proper transportation/
storage of the cylinder at all times.
If gas is leaking from cylinder, move away from cylinder immediately and call your gas supplier or
fire department. DO NOT try to address problem yourself.
DO NOT use a flame to check for gas leaks.
DO check for gas leaks and any obstructions to burners before use. This is especially important
after a period of storage or non-use.
The flexible tube should be changed whenever it is damaged or cracked or by expiration date
printed on the tubing. Or, change tube every five (5) years.
Always connect or replace cylinder in a well-ventilated area, and never in the presence of a flame,
spark or heat source.
Grill must be kept away from flammable materials.
Turn off gas supply at gas container after use.
Do not alter this grill in any manner.
Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid burns,
unless you are wearing protective gear (BBQ mittens, pot holders, etc.).
Note that parts sealed by manufacturer or its agent must not be altered.
When assembling the grill, position the connection flexible tube so that it is protected
against twisting.
A-2

Publicidad

Tabla de contenido
loading

Productos relacionados para Char-Griller Flat Iron 8036

Tabla de contenido