Teka IOVEN Manual Del Usuario página 45

1. Turn the oven on and select the Pyrolysis
feature .
PYROLYSIS - PROGRAMME
PIROLISIS - PROGRAMA
P1: Limpieza suave
P1: Gentle clean
P2: Limpieza normal
P2: Normal clean
P3: Limpieza intensiva
P3: Intensive clean
2. Choose the most suitable pyrolytic program-
me depending on how dirty your oven is:
P1: Gentle pyrolysis. Lasts 1 hour.
P2: Medium pyrolysis. Lasts 1.5 hours.
P3: Intensive pyrolysis. Lasts 2 hours.
3. Confirm your choice
terwards, the door will lock automatically.
WARNING
If the door is not properly closed, the
pyrolysis cycle will not begin. An audible
signal will sound and the symbol will flash on
the screen .
If this occurs, close the door properly to
activate the lock and start the pyrolytic cycle.
4. When the door is locked the
light up on the clock display and the time
remaining until the end of the cycle will be
shown.
P2
1:29
CANCEL ACCEPT
. Immediately af-
5. On completion of the pyrolysis time, the
symbol will
6. The oven's heating process has ended,
IMPORTANT
Before starting the pyrolytic cleaning cy-
cle, it is possible to vary the process by
selecting a different start time.
To do so, press "START TIME" in the
upper right corner of the screen and pro-
gramme the required start time.
Once the pyrolysis process has started,
the door will automatically lock and the
oven will remain on standby. When the
programmed start time has been rea-
ched, the cleaning process will automa-
tically start.
During the pyrolytic cycle you cannot se-
lect a different timer option.
Do not try to open the oven door as this
may interrupt the cleaning process.
symbol will change to
P2
0:00
however the oven is extremely hot and
cannot be used.
The cooling motor will operate and the
symbol will remain on until the oven cools
down.
English
.
45
User's Guide