Control Panel; Buttons; Mode Button - brondell REVIVE PR50-W El Manual Del Propietario

CONTROL PANEL

BUTTONS

1. Power Button
Powers the Revive on and off. To turn off the power, press and hold the power
button for approximately one second.
2. Fan Speed Button
Use it to select the desired fan speed. When you touch the button, the fan speed
indicator changes in ascending order from 1 to 5. 1 is the lowest fan speed, and 5
is the highest.

3. Mode Button

This button toggles between the three "automatic" Operating Modes: Auto, Eco,
and Allergen. See pages 16–17 for more detail on the individual operating modes.
4. Timer Button
This activates the Auto-Off Timer. Pressing this button increases the duration
of the timer from 1 to 12 hours, in one-hour increments (indicated by #7 on the
diagram on page 13). Once the timer has expired, the Revive will power off.
To cancel the auto-off timer, press and hold the Timer Button for two seconds.
5. Light On/Off Button
All displays except Air Purification indicator (AIR) and Humidifying indicator (HUM)
are turned off. These are indicated by #6 on the diagram on page 13.
6. Filter Reset Button
Press this button to reset the Filter Change Timer after you have replaced filters
in the Revive (see page 20 for more details).
12
5
1 2 3
6
4