Belkin TuneCommand AV Manual Del Usuario página 4

Operating Instructions
STEP 1 - TuneCommand AV Dock Setup
1. Place the TuneCommand AV Dock in the desired
location on your home entertainment system.
2. Insert the barrel plug of the included AC
power adapter into the "power in" port on the
TuneCommand AV Dock. Plug the other end of
the AC power adapter into your wall socket or
surge protector.
3. Insert the 3.5mm end of the included AV
cable into the "Stereo AV Out" port on the
TuneCommand AV Dock. Plug the other end of
the AV cable into the input ports on the back of
your TV or stereo receiver.
NOTE: For optional connectivity, you can use
your own 2-RCA-to-2-RCA and S-video cables
in lieu of the included AV cable. Connecting
through the RCA outputs disables the volume-
control functionality of the Remote Control.
4. Select the appropriate insert tray for your
iPod and insert it into the top well of the
TuneCommand AV Dock (Fig. 1). Inserts for the
iPod video and iPod nano are included with your
purchase of the iPod.
5. Insert the iPod into the
TuneCommand AV Dock.
Operating Instructions | 04
Fig. 1
Pull up here to remove the insert
iPod mini
4GB 6GB
��� ��������� ��� ����� ����� �������
iPod 20GB
U2 Special
��� ��������� ��� ����� ����� �������
Edition
��� ��������� ������ ������� ��� ����� ����� ������� iPod
40GB
��� ��������� ��� ����� ����� �������
��� ��������� ������ ������� ��� ����� ����� �������
iPod with color
display, 20GB 30GB,
U2 Special Edition
��� ��������� ��� ����� ����� �������
��� ��������� ������ ������� ��� ����� ����� �������
iPod with color
display, 40GB
60GB
��� ��������� ������ ������� ��� ����� ����� �������
SNAP