Belkin TuneCommand AV Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Operating Instructions
STEP 2 - TuneCommand AV Remote Control Setup
1. Turn the Remote Control so that the buttons are facing down. Press the release button to
open the battery tray, and gently pull it out of the housing until it stops (Fig. 2). Please do
not force the battery tray completely out of the housing.
2. Insert the battery with the (+) side facing up and push the battery cover back into the
Remote Control until the button snaps back into place and the battery tray is securely
shut.
3. Now press any of the Remote Control's buttons for the TuneCommand AV Remote Control
and Dock to pair up. The green lights on the Dock and the Remote Control blink when the
first button-press command from the Remote Control reaches the Dock correctly. NOTE:
If the battery is removed or replaced, you will need to unplug the AC power adapter
from the TuneCommand AV Dock and plug it back in to re-establish connection with
the Remote Control.
2
3
1
Fig. 2
Operating Instructions
EN
| 05

Publicidad

Tabla de contenido
loading

Tabla de contenido