auna Areal Bar 750 Manual De Instrucciones página 35

Select different input mode
Press the Mode button repeatedly on the main unit or press Mode button
on the remote control to select relevant input mode.
Notes:
• The LED display will go off automatically if the sound bar is sitting idle
during any playback mode or there is no input signal received for about
3 minutes, press any button once to light up the display again.
• When the sound bar is sitting idle and no input signals are being
received for about 15 minutes, the sound bar will automatically switch to
Standby mode.Playback with BT device
This device offers you the possibility to use a BT enabled device. The
functional radius is limited to approx.10 metres depending on the
surroundings and the unit used.
Logging on devices (Pairing)
Before using your speaker with a compatible device, such as a mobile
phone, for the first time, you must pair and connect it to the device.
8. Ensure, that the BT function is activated on your player (e.g. mobile
phone).
9. While in Power On mode, press the Mode button on the main unit or the
BT button on the remote control to select the BT mode. "BT" flashes to
show that the pairing mode is activated.
Pair the Speaker
1. If you haven't paired the speaker with a device, or the paired devices list
is empty, pairing mode is activated.
2. Activate BT on the compatible device, and set it to search for compatible
devices.
3. Select the speaker name: "Areal Bar 750" from the list of found devices.
Note: Only one playback unit can be connected to the speaker. If the
speaker is already connected to another playback unit, the speaker will not
appear in the BT selection list.
4. If your device asks for a passkey [depending on the device
manufacturers, model, and software version], then enter digits
"OOOO"(four zeros) and press OK. If pairing has been carried out
successfully, a prompt sound is heard, meanwhile, the "BT" symbol stops
flashing.
5. After the connection is complete, you can listen to music wirelessly
through BT and select music from your BT device.
6. Press the / buttons on the remote control or the"+"/"-" buttons on
EN
35