Display; Function Keys - PCE CT 65 Manual De Instrucciones

3.2

Display

1. Working mode
2. Number of measured data in working mode
3. Automatic measurement mode
4. Ferrous or non-ferrous materials (switches automatically in automatic mode)
5. Battery level indicator
6. Measurement values
7. Unit
8. Delete data
3.3

Function keys

Key name
"Select" key
"Up" key
"Zero" Key
"Back" Taste
"Down" key
Function
Press the key to switch the device on, off and to confirm your
choice.
Use the key to move upwards in the submenus and to enter the
working mode.
Calibration for ferrous and non-ferrous metals.
Use the key to go one step back or to delete the last measured
value.
Use the key to move downwards in the submenus and to change
the working mode.
© PCE Instruments