Serial Number; Data; Read Out Data; Delete Data - PCE CT 65 Manual De Instrucciones

5.2.5

Serial number

Press the "Select" key to enter the menu.
1.
Use the "Up" / "Down" keys to get to the submenu "Set".
2.
Press the "Select" key to enter the submenu.
3.
Press the "Up" / "Down" keys to get to the submenu "Information".
4.
Press the "Select" key to view information on the serial number.
5.
If you have all desired information, press the "Back" key to return to measurement
6.
mode.
5.3

Data

5.3.1

Read out data

You can review the gathered data for every mode. Choose "all-delete" to delete all
measurements within the groups.
Press the "Select" key to enter the menu.
1.
Use the "Up" / "Down" keys to get to the submenu "View".
2.
Press the "Select" key to enter the submenu.
3.
Press the "Up" / "Down" keys to choose the working mode.
4.
Press the "Select" key to confirm the working mode.
5.
Use the "Up" / "Down" keys to view the measurement data.
6.
Press the "Back" key to leave the mode or use the "Select" key to delete the data from
7.
that working group.
5.3.2

Delete data

The system allows you to delete data in three different ways.
a. Delete current data: During measurements, you can delete the data that has been
taken last by pressing the "Back" key.
Delete all data: Enter the "View" menu (measure view). Here, you can delete all data
b.
and statistics.
c. Group data: Enter the menu for the working groups (working mode). Here, you can
delete certain groups.
© PCE Instruments