Sharp SJ-WX830F Manual Del Usario página 12

Main modes
Express freezing
This mode is to freeze food quickly not to lose its flavor.
Most moisture inside the food freeze between -1°C - -5°C.
It is important to accelerate the freezing speed to reach
-5°C for making high-quality frozen food.
How to operate
Procedure
1
Put the food.
2
Press enter key.
3
Press icon.
4
Press icon again.
• ON / OFF switches in the order by pressing the
icon.
5
Press enter key.
Express Freezing ends automatically in
approx. 2~4 hours. (The icon turns off.)
Note
• Large food cannot be frozen in a single operation.
• Express Freezing may require more than 4 hours when
the operation overlaps with defrosting of the cooling unit.
The operation starts after defrosting is completed.
• Avoid opening the door as much as possible during
operation of this mode.
• The operating sound may become louder than usual
while this mode is ON but it is normal.
Tips for the best freezing
• Pack foods into freezer bags or put them in sealed
containers to avoid freezer burn which is a dry spot on
foods.
To help foods freeze faster, pack them in thin layers.
• Lay them flat into the freezer case under the ice storage
box.
• If you wish to freeze large items, you may remove the
freezer case and spread them out on the freezer shelf.
EN-10
Display
Current setting
(This indication shows OFF.)
The setting is changed.
Plasmacluster
The ionizer inside your refrigerator releases clusters of
ions which are collective masses of positive and negative
ions, into the refrigerator compartment.
These ion clusters inactivate airborne mold fungus.
mold
fungus
How to operate
Procedure
1
Press enter key.
2
Press icon.
3
Press icon again.
• ON / OFF switches in the order by pressing the
icon.
4
Press enter key.
The indicator (blue) in
the refrigerator turns on.
Note
• There may be a slight odor in the refrigerator. This is the
smell of ozone generated by the ionizer. The amount
of ozone is minimum and quickly decomposes in the
refrigerator.
Display
Current setting
(This indication shows OFF.)
The setting is changed.