Power Walker 1000RM LCD Manual De Instrucciones página 12

Display
Backup time information
Configuration and fault information
EN
Mute operation
Output & Battery voltage information
Load information
Programmable outlets information
Mode operation information
Battery information
Input & Battery voltage information
Function
Indicates the estimated backup time.
H: hours, M: minute, S: second
Indicates the configuration items, and the configuration items are
listed in details in section 3-5.
Indicates the warning and fault codes, and the codes are listed in
details in 3-7 and 3-8.
Indicates that the UPS alarm is disabled.
Indicates the output voltage, frequency or battery voltage.
Vac: output voltage, Vdc: battery voltage, Hz: frequency
Indicates the load level by 0-24%, 25-49%, 50-74%, and 75-100%.
Indicates overload.
Indicates the load or the UPS output is short circuit.
Indicates that programmable management outlets are working.
Indicates the UPS connects to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
Indicates the ECO mode is enabled.
Indicates the Inverter circuit is working.
Indicates the output is working.
Indicates the Battery level by 0-24%, 25-49%, 50-74%, and
75-100%.
Indicates the battery is fault.
Indicates low battery level and low battery voltage.
Indicates the input voltage or frequency or battery voltage.
Vac: Input voltage, Vdc: battery voltage, Hz: input frequency
11