Installation And Setup; Rear Panel View - Power Walker 1000RM LCD Manual De Instrucciones

2. Installation and setup

NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is
damaged. Please keep the original package in a safe place for future use.
NOTE: There are two different types of online UPS: standard and long-run models. Please refer
to the following model table.

2.1. Rear panel view

1K(L)/1.5K(L)
3K (L)
1. Programmable outlets: connect to non-critical loads.
2. Output receptacles: connect to mission-critical loads.
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)
7. USB communication port
8. RS-232 communication port
9. SNMP intelligent slot
10. External battery connection (only available for L model)
Model Type
1K
1.5K
Standard
2K
3K
Model Type
1K-L
1.5KL
Long-run
2K-L
3K-L
2K( (L)
4
EN