No intente reparar este producto por su cuenta. Remita todas las reparaciones Professional or to find a dealer or distributor near you, visit PRO.BOSE.COM. a centros de servicio, instaladores, técnicos o distribuidores autorizados. Para comunicarse con Bose Professional o para encontrar un distribuidor cerca de WARNINGS/CAUTIONS: usted, visite PRO.BOSE.COM.
à des centres de service, installateurs, techniciens, revendeurs Reparatur- und Wartungsarbeiten nur von autorisierten Servicepartnern, ou distributeurs agréés. Pour contacter Bose Professional ou pour trouver un Monteuren, Technikern, Händlern oder Vertreibern durchführen. Die Bose revendeur ou un distributeur près de chez vous, rendez-vous à l’adresse Professional Kontaktdaten für Ihr Land sowie Informationen zu Händlern oder...
Per contattare Bose Professional o per trovare il distributeur. Om contact op te nemen met Bose Professional en voor informatie rivenditore o distributore più...
Overview PRO.BOSE.COM Overview Bose ArenaMatch array rigging accessories are designed for use with ArenaMatch DeltaQ Array loudspeakers (AM10, AM20, and AM40) only. Array Plates (AMAPSHRT) (AMAPLONG) Use the array plates to secure the top module of an array to building structures. All accessory kits are shipped in pairs and includes all required fasteners.
Specifications PRO.BOSE.COM Specifications Product Dimensions and Working Load Limits Array Plate Short Product net weight: 5.3 kg (11.7 lbs) Top View Front View 146 mm 5.7 in 349 mm 126 mm 76 mm 13.7 in 4.9 in 3.0 in ×3 Ø 21 mm 0.8 in Single Point, 10:1 Working Load Limit WLL = 250 kg (550 lbs) each side...
Specifications PRO.BOSE.COM Array Plate Long Product net weight: 16.8 kg (37.0 lbs) Top View Front View 146 mm 5.7 in Side View 42 mm 1.7 in 603 mm 23.7 in ×14 Ø 21 mm 0.8 in Single Point, 10:1 Working Load Limit WLL = 160 kg (350 lbs) each side Installation Guide •...
Specifications PRO.BOSE.COM Pullback Bracket Product net weight: 5.1 kg (11.3 lbs) Top View Front View Side View 125 mm 4.9 in 396 mm 150 mm 15.6 in 5.9 in ×2 Ø 21 mm 0.8 in Single Point, 10:1 Working Load Limit WLL = 205 kg (450 lbs) each side Note: Pullback brackets can be used on both the top and bottom of an array.
Specifications PRO.BOSE.COM Module Connect Plate Product net weight: 4.4 kg (9.7 lbs) Top View Front View Side View 296 mm 11.7 in 347 mm 131 mm 80 mm 13.7 in 5.2 in 3.1 in Single Point, 10:1 Working Load Limit Front and Rear Rigging WLL = 360 kg (800 lbs) each side Installation Guide •...
Specifications PRO.BOSE.COM Spreader Bar Product net weight: 10.3 kg (22.7 lbs) Top View 47 mm 1.9 in Front View 803 mm 31.6 in 306 mm 12.0 in 25 mm 256 mm 1.0 in 10.1 in 120 mm 4.7 in ×3 Ø 21 mm 0.8 in Side View Single Point, 10:1 Working Load Limit...
Array Rigging ArenaMatch DeltaQ array loudspeakers include four M12 threaded inserts per side, designed to be used with optional ArenaMatch rigging accessories. Additionally, the M10 and M6 inserts on each side are designed to be used with the optional ArenaMatch U-bracket accessory.
Installation PRO.BOSE.COM Connecting Array Plates to a Loudspeaker Module Remove the plastic plugs from the loudspeaker module on either side of the module. Line up your array plate with the open inserts on either side of the module. Note: If using a long array plate, determine which attachment holes and orientation to use based on your array design.
Installation PRO.BOSE.COM Connecting Loudspeaker Modules Using a Module Connect Plate Remove the plastic plugs from the loudspeaker modules on either side of the modules. Line up your module connect plate with the open inserts on either side of both modules. Using the included M12 screws and washers, secure the modules together with the module connect plate.
Installation PRO.BOSE.COM Connecting a Pullback Bracket to a Loudspeaker Module Remove the plastic plugs from the loudspeaker module on either side of the module. Line up your pullback bracket with the open inserts on either side of the module. Note: Determine which orientation to use based on your array design. Using the included M12 screws and washers, secure the pullback bracket to the module.
Installation PRO.BOSE.COM Connecting a Spreader Bar to a Loudspeaker Module Confirm the orientation and position of the spreader bar in relation to the array plates based on your array design. Note: The center attachment point is slightly off-center to account for the module center of gravity position.