Connecting A Pullback Bracket To A Loudspeaker Module - Bose Professional ArenaMatch DeltaQ Guia De Instalacion

Installation

Connecting a Pullback Bracket to a Loudspeaker Module

1. Remove the plastic plugs from the loudspeaker module on either side of the
module.
2. Line up your pullback bracket with the open inserts on either side of the module.
Note: Determine which orientation to use based on your array design.
3. Using the included M12 screws and washers, secure the pullback bracket to the
module.
Note: Torque screws to 40.7 newton·meters (30 pound·feet).
q
16 • English ArenaMatch Rigging Accessories • Installation Guide
PRO.BOSE.COM
w
e