LEGRAND IME CONTO D4-Pd Manual Del Usuario página 11

63A energy meter,
direct connection
7. GENERAL FEATURES
Laser marking
Left side
Traceability information
Technical data sheet: IDP000189EN_01
Codes: CE4DF30PCL1 – CE4DF3DTCL1 – CE4DF3MTCL1
Model: CONTO D4-Pd
7. GENERAL FEATURES
Display:
- Graphic, backlit, 1.8 inches (256x128).
Right side
Resolution:
Wiring diagram
- Total meters: 0,01kWh/kvarh
- Partial meters: 0,01kWh/kvarh
- Tariff meters: 0,01kWh/kvarh
Maximum indication
- Total meters: 9 999 999,99
- Partial meters: 9 999 999,99
- Tariff meters: 9 999 999,99
Metrological LED:
Display of the value and programming:
- By means of the front keypad, 2 pushbuttons.
- Change protected by identification code (predefined code 1000) ;
the code can be changed during the programming procedure.
Measurements and precision in conformity with
- Current: cl.0,5
- Voltage: cl.0,5
- Frequency: ± 0,1 Hz
- Instantaneous total active power, phase, average value and max.
average value cl.1
- Instantaneous total active power, phase, average value and max.
average value: cl.1
- Instantaneous total reactive power, phase: cl.2
- Instantaneous total apparent power, phase: cl.1
- Power Factor: cl.1
Average power:
- Measurement: active power
- Calculation: moving average, on the selected period
- Average time: 5/8/10/15/20/30/60 min.
Hour meter:
- Counting of operating hours and minutes (resettable meter)
- Resolution: 7 figures (5 for the hours + 2 for the minutes)
- Maximum display: 99 999.59 (tariff total)
- Programmable value: 0...50% Pn (positive)
Updated: -
(continues)
1Wh/imp.
Created: 15/03/2019
EN/IEC 61557-12
4 | 7