Solving Operational Problems - Fulgor Milano FCMO 4511 TM Instalación, Uso, Mantenimiento

Before contacting service, check the following to avoid unnecessary service charges.
Oven Problem
Other F__ Error appears in the display window.
The oven display stays OFF
Cooling fan continues to run after oven is turned off
Oven is not heating
Oven is not cooking evenly
Clock and timer are not working properly
Excessive moisture

16 - Solving Operational Problems

Problem Solving Steps
Remove power and turn it back on again after a few seconds. If
condition persists, note the code number (in the EVENT LOG list)
and contact service.
Turn off power at the main power supply (fuse or breaker box).
Turn breaker back on.
If condition persists, call an authorized service.
The fan turns off automatically when the electronic components
have cooled sufficiently.
Check the circuit breaker or fuse box to your house. Make sure
there is proper electrical power to the oven. Make sure the oven
temperature has been selected.
Refer to cooking charts for recommended rack position. Always
reduce recipe temperature by 25°F (15°C) when baking with
Convection Bake mode.
Make sure there is proper electrical power to the oven. See the
Clock sections on pages 10 and 13.
Convection modes will eliminate any moisture in oven (this is one
of the advantages of convection).
EN
29