Environmental Protection; Symbol Identification - Ingersoll Rand QX Serie Especificaciones Del Producto

Installation
Cable Connection:
A standard USB cable (USB to Mini Type B) can be used to connect to a computer loaded with ICS
software. Maximum cable length 2 meters.
Auxiliary Handle Mounting:
Mount Auxiliary Handle on Gear Case with Plastic Handle positioned in the groove. Hand tighten.
Hanger Connection:
For Pistol Tool, insert ends of hanger accessory at top of housing. For Angle Tool, hang using
molded feature at rear of housing.
Adjustments
●
Disconnect the tool from the battery before making any adjustments or changing accessories.
Such preventive safety measures reduce the risk of starting the tool accidentally.
Storage
Disconnect the battery from the tool when not in use.
Parts and Maintenance
Tool service is recommended every 250,000 cycles or one year, whichever comes first. Tool repair
and maintenance should only be carried out by an authorized trained personnel. When such
service or repair is required, locate the nearest Ingersoll Rand Authorized Service Center.
For Authorized Trained Personnel:
For 'Assembly/Disassembly' and other maintenance instructions regarding these products, see
Maintenance Information Form 4710402, located at ingersollrandproducts.com or contact the
nearest Ingersoll Rand Office or Distributor.

Environmental Protection

When the life of an Ingersoll Rand electrical product has expired, it must be recycled in
accordance with all applicable standards and regulations (local, state, country, federal, etc.).
Improper disposal may endanger the environment.

Symbol Identification

Return waste material for
recycling.
Original instructions are in English. Other languages are a translation of the original instructions.
47104286_ed9
WARNING
NOTICE
Do not dispose of this
product with household
waste material.
Li-Ion
Product contains Lithium-Ion.
Do not dispose of this product
with household waste material.
EN
EN-2