Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Around the house
• Organize 'junk' drawers and keep easy to lose items like nails and screws safe by
vacuum packaging them in a vacuum bag. That way, items are clearly visible and
organized within the bag.
• Don't worry about polishing silver ever again! Simply vacuum package rarely
• used silverware in vacuum bags to prevent the oxidation that causes tarnishing.
Hint: place a folder paper towel in between sharp edges of the silverware and the
vacuum bag to prevent puncturing.

TROUBLESHOOTING

Under the proper circumstances, your Vacuum Sealer will give you many top-notch
vacuum performances. In some instances, problems may arise. Please consult the trouble
shooting menu before calling customer support.
Note: In order to maintain a longer lifetime, we strongly recommend to stop at least
20 seconds between each seal.
In order to avoid burn on the hand, when you open the machine lid, press "Seal" button.
Error Code
Description
E1
If "E1" is displayed on the screen, this means that the unit
is not heating. Simply close the device cover to reuse the
device.
E2
If the unit is used for a long period of time and is running
hot, the integrated overheating protection is activated. "E2"
is displayed on the screen. In this case, switch off the device
and disconnect the power plug from the socket. Leave the
device switched off for at least 20 minutes before using it
again.
E3
Turn the unit off and unplug the power cord when "E3" is
displayed on the screen. Leave the unit off for about 20
minutes before restarting.
EN
39

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

10033152

Tabla de contenido