GENERAL INFORMATION
2ELB24-M2 control panel has been designed to control 1 or 2 operators 24 Vdc for
swing gates. It has got an integrated radio receiver. It is also possible to set the
slowing down and anti-crashing features that grant an easy and safe installation.
Safety advises.
In order to prevent any kind of accident, only qualified and professional people will
be allowed to operate, install, repair or ad just the control panel and only after all the
necessary safety rules have been respected, as well as power supply cut off
(including the back up batteries). If the control panel will be used for any other
purpose (not reported in the user manual), will be not responsible for any kind of
damage or accident caused to people, animals or things. This product is not suitable
to be installed in an explosive atmosphere. Keep this booklet together with the rest
of the technical information regarding the installation in a suitable place and
available to professional installer who will need to do future maintenance.
TECHNICAL FEATURES
Absorbed power....................................... 100 mA
Fuse F1.................................................... 20 A
Fuse F2.................................................... 20 A
Time inversion.......................................... 2 sec.fixed
Temperature to work................................. Da –20°C a +50°C
LAY OUT
SW1
ON
1
2
DL6
P1 P2
33 34
1 2
3 4 5 6 7 8
SW2
ON
3
4
1
2
3
4
-
P3
AMP
-
RALL
-
VELOC
+
+
DL7
+
9 10 11 12 13 14 15 16 17 18 19 20 21 22
BLACK
RED
12V 7Ah
MAX
F2
F1
28 27
-
+
BATTERY
OUTPUT
24Vdc
12V 7Ah
MAX