Panasonic AW-HE870E Manual Del Operador página 41

How to operate the system
wControl exercised from the Multi-Function Controller AW-RP655
Each time the MODE button is pressed, the setting is
switched between CAM and BAR.
The MODE button lights up at the BAR setting.
This is used to switch between AUTO and
MANU for the gain. The GAIN button lights
when the AUTO setting is selected.
For switching WHITE BAL A, B
or ATW. *1
This is used to acquire the
statuses of the camera and
For executing ABB.
synchronize the data. *6
*2, *5
Jog dial (L)
When the LCD panel is in the gain adjustment mode
Adjust the R GAIN setting (–150 to +150).
When the LCD panel is in the pedestal adjustment mode
Adjust the R PEDESTAL setting (–150 to +150). *7
Jog dial (main)
When the LCD is in the gain adjustment mode
(GAIN button: MANU)
Select the desired gain setting from GAIN 0 dB to 18 dB.*8
When the LCD is in the gain adjustment mode
(GAIN button: AUTO)
Select the desired gain setting from AGC MAX GAIN 6 dB,
12 dB or 18 dB.
When the LCD is in the pedestal adjustment mode
Adjust the PEDESTAL TOTAL setting (–30 to +30).
When the camera menu mode is established
For executing AWB. *2, *3
Perform the camera menu operations.
Jog dial (R)
When the LCD panel is in the gain adjustment mode
Adjust the B GAIN setting (–150 to +150).
When the LCD panel is in the pedestal adjustment mode
Adjust the B PEDESTAL setting (–150 to +150). *7
When the camera menu is used
The jog dial performs the same operations as the MENU
switch on the camera main unit.
These are used for menu operation.
Switch between gain adjustment mode and pedestal adjustment mode.
- 40 (E) -
Flashes when an alarm
(Fan Error) is received
from the camera. *4
For selecting the cameras and
pan-tilt head systems to be
operated.