Panasonic AW-HE870E Manual Del Operador página 30

System configuration (Connections)
wConnection of the Indoor Pan-tilt Head AW-PH400 (continued)
When an SDI card (AW-HHD870) has been installed
p Use a coaxial cable to connect the SDI OUT connector on the SDI card and the SDI IN connector on the AW-PH400.
p Use a coaxial cable to connect the SDI connector on the AW-PH400 to the SDI input connector on the colour monitor.
Note
p HD (1080i or 720p) analogue component signals cannot be output from the AW-PH400.
p AW-IF400 Switch settings (when the AW-RP555/AW-RP655 is used)
SET UP
SW1 SW2
1 2 3 (Tilt range) 4
ON OFF
OFF OFF ON OFF OFF
(300 deg.) (190 deg.)
- 29 (E) -