Input Contacts - Optimus SMM-8SA Manual De Instalación Y Funcionamiento

5. INPUT CONTACTS

The unit has 8 input contacts that can be used to activate or stop messages' sequences by pulse
or level, as well as being used for ACK function.
The following parameters are available for each contact:
Activation: It can be pulse, level, or stop.

Pulse: The sequence will only be played once, if at the end of the message, the pulse is
still active, the sequence will be played again.

Level: The sequence will be played continuously while the contact is closed, and stopped
when the contact is opened. If "Play complete sequence" checkbox is checked, the
sequence will be played to the end even if the contact is opened during playback.

Stop: It will stop the sequence in progress (only for sequences activated by pulse).

ACK (only in contact 8): When ACK is selected, confirmation mode will be activated. In
this mode, once a contact associated with a sequence has been activated, it will not be
played until the ACK contact is
SMM-8SA v2.0
SMM-8SA
SCHEDULED MESSAGE MODULE
Image 7. Contact input configuration (Messages)
closed.
MESSAGE MANAGER
Page 19 of 27