Optimus SMM-8SA Manual De Instalación Y Funcionamiento página 50

SMM-8SA
MESSAGE MANAGER
SCHEDULED MESSAGE MODULE
Activate: Select or clear the check box to enable or disable it.
Message label: Scheduling name. It will be displayed in the left menu of the web page.
Message 1: Select one message from the internal memory.
Limit to: Select the maximum message time. The message will be cut after that time.
Wait: Select the delay between the first and second messages.
Message 2: Select one message from the internal memory.
Limit to: Select the maximum message time. The message will be cut after that time.
Wait: Select the delay between the second and third messages.
Message 3: Select one message from the internal memory.
Limit to: Select the maximum message time. The message will be cut after that time.
Wait: Select the delay before the end of the sequence.
*If you only want to play a message, leave blank message's fields 2 and 3.
Repetitions: Select how many times the 3 messages sequence will be repeated.
Start Date: Select the day and time for the program to start.
End Date: Select the day and time for the program to end. If "Only this day" and "No end date" are
not checked.
Restrictions: Choose desired restrictions to be applied.
Days: Select if the program will be activated daily, or at any combinatory of days. If "Only this day"
is not checked.
Only this day: Select if you want play the schedule only the indicated day.
No end date: Select if you want play the schedule without an end date.
Repeat sequence: Select how often the sequence will be repeated between the start time and end
time. If only one repetition is required, leave this field blank.
Activation time: Select the start time and end time for the schedule to be played. Only if some
value is selected in repeat sequence.
Zones: Select the zones where the sequence has to be broadcast.
Click "save" to save changes, "cancel" to discard the changes or "Clear" to restore the factory
settings.
SMM-8SA v2.0 Page 22 of 27