Factory Reset - Optimus SMM-8SA Manual De Instalación Y Funcionamiento

7.3 FACTORY RESET.

In order to restore factory configuration it is necessary to follow the next steps:

Turn off the unit.

Connect all contact inputs to GND.

Turn on the unit.

Wait for the Ready indicator to blink light yellow.

Disconnect all inputs.

Wait for the Ready indicator to light yellow.

Access the unit from your web browser, using the default IP (192.168.1.234), and configure
it again according to requirements.

Restart the unit.
Factory Reset.
SMM-8SA v2.0
SMM-8SA
SCHEDULED MESSAGE MODULE
Image 8. Connection example to restore factory settings.
MESSAGE MANAGER
Page 25 of 27