(En) Step 3: Getting - Behringer EUROLIVE B115MP3 Guia De Inicio Rapido

20
EUROLIVE B115MP3/B112MP3
EUROLIVE B115MP3/B112MP3 Getting started

(EN) Step 3: Getting

started
Place the speaker(s) in desired locations,
either on stands or as wedge monitors
on the floor.
Make all necessary connections.
DO NOT turn on the power yet.
Turn on your audio source
(mixer, microphone).
Turn on your speaker(s) by pressing the
POWER SWITCH. The POWER LED will
light up.
Play your audio source or speak into your
microphone at a normal to loud level.
Adjust the LEVEL knob to the desired
volume. If the CLIP LED flashes,
turn the LEVEL knob down. If using
multiple speakers, the LEVEL knob must be
adjusted on each speaker.
If necessary, adjust the HIGH and
LOW EQUALIZER knobs on each speaker
to boost or cut treble and bass
frequencies to taste.
Attach a USB flash drive to the USB port.
Switch between folders on the drive
using the FOLDER buttons. Select the
track you wish to play using the TRACK buttons.
Press the PLAY/PAUSE button to start or
stop playback.
Press the REPEAT button and then the
MODE button to select between
repeating: ALL mp3 files on the
USB drive, files in the current FOLDER, the currently
playing file (SINGLE) or to play all files in
RANDOM order.
Press the DISP(LAY) button to change
what appears on the screen of the
MP3 player between the TAG
(artist and song name information),
TRACK (file name up to 64 characters) or TIME
(shows track number in current folder and the
elapsed time of the currently running track).
Press the DISP(LAY) and MODE buttons
at the same time to cycle between
screen contrast intensities.
Adjust the playback volume using
the LEVEL knob.
Optional wireless microphone set-up
Only insert the optional Behringer
DIGITAL WIRELESS microphone
receiver into the input.
Turn the ON/OFF switches on the
microphones to the "ON" position.
During the pairing process, the LED on
the dongle will flash. Once the
connection between the wireless
microphone and the receiver is achieved, the LED
will remain on (solid).
Speak into the wireless microphones
and adjust the volume using the volume
buttons on the individual microphones.
Press the volume down button for two seconds to
mute the microphone signal. Press the volume up
button to unmute the microphone.