Stop Mode - Lenco SCD-6900 Manual De Usuario

Language setting
This apparatus provide 4 languages for FM/DAB operation display.
1. In DAB/FM mode, press "Menu/Mem/clk‐adj" button (12) to enter the "Menu", then press Skip down
(11) or Skip up
2. Press "Stop/Enter" button (10) to enter the "System" setting, then press Skip down
up (19) button to select "Language" then press "Stop/Enter" button (10) to enter language mode,
then press Skip down
English/French/German/Italian. Then press "Stop/Enter" button (10) to confirm the setting.
3. In any state press "Menu/Mem/clk‐adj" button (12) to quit the setting mode
Preset stations
You can store up to 20 radio stations in the memory (10‐FM/10‐DAB).
1. Set to FM/DAB mode
2. Turn to the desired radio station by "manual" or "auto" tuning method.
3. Press and hold the "Mem/clk‐adj" button (12) to enable memory state.
4. Press Skip down
storage.
5. Press "Stop/Enter" button (10) to confirm the setting.
6. Repeat step 2 to 5 to store other stations.
Recall preset stations
1. Set to FM/DAB mode
2. Press Pre‐up button (20) to recall the stored station.
3. Press Skip down
4. Press "Stop/Enter" button (10) again to confirm the recall station.
DAB/FM reset:
If you would like to erase all the FM/DAB staions stored.
1. Set in DAB or FM mode, press "Menu/Mem/clk‐adj" button (12) to enter the "Menu", then press Skip
down (11) or Skip up
2. Press "Stop/Enter" button (10) to enter the "System" setting, then press Skip down
up (19) button to select "Factory reset". Then press "Stop/Enter" button (10) to confirm the
factory reset.
3. Apparatus will then erase all the stored stations.
Playing CD/MP3 disc
 Getting started
1. Press the Function button (9) to select CD mode.
2. Open the CD door by pressing the CD door open/close (7). Put a CD disc into the compartment and
close the CD door.
3. A search is performed if a disc is inside. Total number of tracks is read.
 Play/pause mode
1. If Play/Pause button (18) is pressed during stop mode, the first track will be played.
2. If Play/Pause button (18) is pressed during playback, the system will go into pause mode and the
pause indicator will light up in the LCD display (8). Press again to resume normal playback.
 Stop mode
1. If Stop button (10) is pressed during play or pause mode. The unit will go into stop mode and
display the total number of track in the LCD display (8).
 Skip mode (skip up
1. During play mode, if skip up
number.
(19) button to select Syetem".
(11) or Skip up
(11) or Skip up (19) button to select the desired station memory for
(11) or Skip up (19) button to select the desired recall station.
(19) button to select "System".
/skip down )
button (19) is pressed it will go to next track and display the track
(19) button to select your desired language between
8
(11) or Skip
(11) or Skip