English - Lenco Xemio-241 Manual De Usuario

English

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not use this device near water.
2. If the fabric is dirty, wipe directly by wet cloth. it could be that it may not
completely be cleaned specially with ball pen and ink pen stains.
3. Do not cover or block any ventilation openings. When placing the device on a shelf,
leave 5 cm (2") free space around the whole device.
4. Install in accordance with the supplied user manual.
5. * Don't step on or pinch the power adaptor. Be very careful, particularly near the
plugs and the cable's exit point. Do not place heavy items on the power adaptor,
which may damage it. Keep the entire device out of children's reach! When playing
with the power cable, they can seriously injure themselves.
6. * Unplug this device during lightning storms or when unused for a long period.
7. Keep the device away from heat sources such as radiators, heaters, stoves, candles
and other heat-generating products or naked flame.
8. Avoid using the device near strong magnetic fields.
9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset
and restart the device following the instruction manual. During file transmission,
please handle with care and operate in a static-free environment.
10. Warning! Never insert an object into the product through the vents or openings.
High voltage flows through the product and inserting an object can cause electric
shock and/or short circuit internal parts. For the same reason, do not spill water or
liquid on the product.
11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near
swimming pools.
12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost care and checked several
times before leaving the factory, it is still possible that problems may occur, as with
all electrical appliances. If you notice smoke, an excessive build-up of heat or any
other unexpected phenomena, you should disconnect the plug from the main
power socket immediately.
14. This device must operate on a power source as specified on the specification label.
If you are not sure of the type of power supply used in your home, consult your
dealer or local power company.
15. * The socket outlet must be installed near the equipment and must be easily
accessible.
16. * Do not overload ac outlets or extension cords. Overloading can cause fire or
electric shock.
3
Xemio-241