Updating Firmware - DJI SPARK Guía De Usuario

Please make sure the batteries are correctly inserted
before charging.
DO NOT cover the Charging Hub when in use.
Status LED Indicator Descriptions
Status Light
Pulsing Green
— Solid Green
— Solid Red
— Solid Yellow

Updating Firmware

DJI will release firmware updates when available. Refer to the official
DJI website and follow the instructions below to update the firmware.
1. Download the latest firmware update program from the official DJI
website. (http://www.dji.com/spark/info#downloads)
2. Turn on the Charging Hub, then connect it to a computer using a
Micro USB cable.
3. Run the firmware update program. Press the update button and
wait for the process to finish.
4. The Charging Hub will automatically restart when the update has
been successfully completed.
5. Repeat this process if, for any reason, the firmware update fails.
Description
Charging.
Fully Charged.
Power supply or battery error.
Check components.
Charging Hub connected correctly.
Please insert batteries.
5