auna multimedia NR-620 Manual Del Usuario página 22

Playback of MP3 files from USB storage media or memory card
• Set the function selector (3) at CD/USB/SD mode and then press Source button (7) to select "USB or
Card" mode.
• Plug-in the USB plug with the face up & make sure it going into completely or insert the memory card
in the direction of the arrow as shown in the label on the underside of the memory card slot cover.
Insert straight without bending.
• Connecting the USB upside down or backwards could damage the audio system or the storage media
(USB thumb drive / SD/MMC card). Check to be sure the direction is correct before connection.
• The system will start reading the storage media automatically after connecting, and LCD display (2)
will show the total number of MP3 files and total number of folder being detected.
• Repeat the same playback procedure as playing CD/MP3 disc as above
Remarks
• The system can detect and read the file under MP3 format only though the USB socket or SD/MMC
card.
• If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format,
some MP3 player may not be able to play via the USB socket. This is not a malfunction of the system.
• USB port does not support connection with USB extension cable and is not designed for communica-
tion with computer directly.
•
Cassette playback:
tape
•
Stop / Eject:
tape will be ejected though the cassette door cover. The " tape forward / eject " button will keeping at
lowest height position.
22
Tape Deck
The system will start the playback automatically after inserting of cassette
Press the " Tape forward / Eject " button completely inwards and the cassette