Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
iv) Copying MP3 files
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB or SD/MMC card if press
the " Record " button (9). The operation procedures is same as CD encoding as stipulate on above, and the
system will switch to copying mode only if MP3 file being read.
Remarks:
•
The system will store the file to USB source first if both USB and SD slot are being occupied by storage media.
•
If press the " Record " button (9) during playback of USB or SD source, the file will copy from USB to
SD or SD to USB.
B) Phono encoding
•
Plug in the USB pen drive for recording (make sure it and enough empty space).
•
Set the function button (3) to " Phono " position and then press the " Record " button (9) directly.
•
The LCD display (2) with show the word " USB " and flashing, after then display "
flashing. Now the system is starting the encoding mode.
•
Start playback at phono for the track which you want to record to USB or SD card.
•
After finish of recoding, press and hold the " Record " button (9) until the text on LCD display (2) stop
flashing and return to " Phono " mode.
C) Cassette encoding
•
Plug in the USB pen drive for recording (make sure it and enough empty space).
•
Set the function button (3) to " Tape " mode and then press the " record " button (9) directly.
•
The LCD display (2) with show the word "Tape" and flashing, after then display "
flashing. Now the system is starting the encoding mode.
•
Start playback of cassette tape which the track you prepare to record.
•
After finish of recoding, press the " Record " button again (9). The symbols "
and the display resumes to "Tape" mode.
D) File copy from USB to SD or reverse
i) copying 1 track (assume copy from SD card to USB mode)
•
Perform normal playback of the track at SD/MMC card you want to copy,
•
Press " Record " button (9) during the playback of the desire track, unit will display "
and flashing. Copying is performing now.
•
After copying is completed, unit will stop playback automatically.
ii) Copying all tracks (assume copy from SD card to USB mode)
•
Select " SD " mode and then insert the SD/MMC card you want to copy.
•
After reading of card information is completed, press the " Record " button (9) and the unit will display
the corresponding flashing symbols. Copying is performing now.
•
After copying is completed, unit will stop automatically.
" & "
" and
" & "
" and
" & "
" disapear.
" & "
"
25
Publicidad
Tabla de contenido
