Hard Disk Page; General Configuration Menu; Settings Section; Ecran" (Screen) Tab - THOMSON 512320 Manual De Usuario

Plug and Play 4 channel colour
network video recorder
• In the upper strip, select the desired camera
then select "Normal" (permanent recording) or
"Mouvement" (recording on detection of
movement) on the top right.
Then draw a square using the mouse on
the half hours to fill or clear the desired
time slot:
• To apply the programming to all cameras, use
the Copy button at the bottom of the screen.
Click Next to continue.

1.4 - hard disk page

The disk space and its recording time equivalent
are indicated here. The "Ecrasement" (Overwrite)
list lets you choose what happens when the hard
disk becomes full. Select "désactiver" (disable) to
do nothing, select a duration, in days, for automatic
programmed deletion, or "auto" if you wish to
replace the oldest videos with the newest ones, only
if necessary.
Important note: the legal time limit on keeping
video footage is 30 days in France.
Click "Sauver" (Save) to finish the configuration
wizard on your device.
d - CONFigurATiON

2 - GENERAL CONFIGURATION MENU

The menu on your device can be accessed at the
bottom of the main screen: right click on the screen
then click on the "Menu principal" (Main menu)
icon on the left:
The main menu is sub-divided into 6 sections:
• Paramètre (Settings): Set the video inputs
(cameras), video outputs (TV screen, monitor),
settings for video recording, network, motion
detection.
• Recherche vidéo (Video search): menu for searching
and playing back video recordings on the device's
hard disk.
• Appareil (Device): Settings linked to the hard disk
• System: The device's general settings such as
setting the date and time, user
accounts and general information.
• Avancé (Advanced): Maintenance, backup and
configuration restore functions, definition of alerts
should the hard disk become overloaded or the
connection to a camera be lost
• Eteindre (Shut down): Switch the device on or off.

2.1 - SETTINGS SECTION

2.1.1 - "ecran" (screen) tab

Here you will find:
• The IP camera tab that lets you add
and list the cameras paired with your device
(same page as shown in the
quick configuration wizard.)
en
11