Disque Dur [Hard Disk]; Configuration General [General Settings] Menu; Parameter Section; Ecran' ['Screen'] Tab - THOMSON 512323 Manual De Instrucciones

d - CONFigurATiON
• In the top strip, select the desired camera and
then select either "Normal" or "Mouvement"
[Motion] on the top right. Then, draw a square
with the mouse over the half-hour time slots you
would like to fill or empty:
• To apply programming to several cameras, use
the 'Copier' [Copy] button at the bottom of the
screen.
Click 'Suivant' [Next] to continue.
1.4 - 'disQuE dur' [hard disc] pagE
The disk's capacity and equivalent recording time
is shown here. The 'Ecrasement' [Overwriting] list
allows you to choose the actions to take should the
disc become full. Select 'désactiver' [deactivate]
to do nothing, select a time of day for programmed
automatic deletion to take place, or 'auto' if you
would like the oldest videos to be overwritten by
more recent ones if necessary.
Important note: the legal time limit on keeping
video footage is set at 30 days in France.
Click 'Sauver' [Save] to finish your device's quick
configuration process.
10
EN
Plug and Play 16 channel colour
network Video recorder
2 - CONFIGURATION GENERAL [GENERAL
SETTINGS] MENU
Your device's menu is accessible from the bottom
of the main screen: right-click on the screen, then
click on the 'Menu principal' [Main menu] icon on
the left:
The main menu is subdivided into 6 sections:
• Parameters: Settings for video inputs (cameras),
video outputs (TV, monitor), video recording
settings, network, motion detection.
• Video search: search menu for playing back
video recordings on the device's hard disk.
• Device: Hard disk settings
• System: General device settings such as date
and time, user accounts, and general information.
• Advanced: Maintenance functions, backup
and configuration restore, alert settings for
if the hard disk is full or if the camera becomes
disconnected
• Shut Down: Stop or restart the device.

2.1 - PARAMETER SECTION

2.1.1 - 'EcraN' ['scrEEN'] tab

Here you will find:
• The IP Camera tab, which allows you to add
and list the cameras paired with your device
(identical to the page with the same name
in the quick configuration assistant.)