C - Installation; Installing The Camera - Avidsen 123985 Manual De Usuario

BATTERY-POWERED 720P IP WIFI CAMERA

1 - INSTALLING THE CAMERA

The camera can be powered by means of:
• A 5V USB port (telephone charger, PC, TV, etc.), where a minimum 1A is recommended
• By 4 LR6 AA alkaline batteries
• By 4 NiMH AA rechargeable batteries. In this case, the camera's wired connection can be used for
recharging
The camera can be attached to a wall, the ceiling or placed on a flat, horizontal surface.
Mount the camera using suitable screws and wall plugs for the type of surface (the screws and plugs
supplied are suitable for solid walls).
Make sure the camera base plate is properly secured to prevent it from falling.

C - INSTALLATION

EN
7