Volume Control; The Ins And The Outs - Samson RESOLV 50a El Manual Del Propietario

Operating the RESOLV 50a
RESOLV 50a Control Panel - continued
3

VOLUME CONTROL

The VOLUME control is used to adjust the overall output level of the RESOLV 50a. When operating
the unit for the first time, start with the VOLUME control set all the way off. Slowly raise the VOLUME
control to reach a comfortable listening level.

The Ins and The Outs

The RESOLV 50a features two input connectors providing easy installation with a variety of audio
devices like recording consoles, hard disk recorders, CD players and computer sound cards, to name a
few. The following section details the RESOLV 50a's input connectors. In addition, there is a detailed
cable-wiring diagram on page 12.
RCA AUDIO INPUT – The RCA
4
input accepts unbalanced signals used
to connect signals from unbalanced,
–10dBV devices.
.
5
1/4-INCH PHONE AUDIO INPUT
A balanced, TRS (Tip, Ring, Sleeve)
1/4-inch phone jack is used to connect
balanced or unbalanced line level sig-
nals.
3
dBr
5
0
-9
-15
0 10
-21
VOLUME
-27
1K
10 100
CROSSOVER FREQUENCY (Hz)
dBr
50
30
0
-15
-30
-50
1K
10 100
FREQUENCY RESPONSE FREQUENCY (Hz)
ACTIVE MONITOR SPECS:
• 70Hz – 20kHz
• BIAMPED 50 WATT WOOFER
COPOLYMER CONE
• 20 WATT TITANIUM FERRO FLUID
TWEETER
• TIME ALIGNED WAVEGUIDE
• MAGNETICALLY SHIELDED
WARNING:
RESOLV MONITORS CAN ACHIEVE
EXTREMELY HIGH SOUND
PRESSURE LEVELS. USE CAUTION
OR HEARING DAMAGE MAY RESULT
S/N
POWER
115-230 vac ó 50Hz/60Hz 175W
RATING
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
www.samsontech.com
DESIGNED AND ENGINEERED IN THE UNITED STATES BY SAMSON TECHNOLOGIES
10
4
-10 INPUT
+4 INPUT
10K 30K 5
10K 30K
POWER
ON
OFF
MADE IN CHINA