Samson RESOLV 50a El Manual Del Propietario página 9

Positioning the Resolv 50a - continued
Speaker Orientation
The RESOLV 50a's can be used in either the vertical or horizontal position. When using the monitors in the hori-
zontal position, be certain to place the left and right side tweeters on the outer most sides. (Figure 2) This will
improve the stereo imaging and bass response by increasing the coupling of the low-end drivers.
A Moment of Reflection
When choosing the height of your monitor system, be careful to avoid reflections off the surface of the mixing
console. (Figure 3.) These reflections arrive at the listening position slightly delayed from the original sound
resulting in strange cancellations and overall unpredictable response. Visualize straight lines representing the
beams of sound radiating from the monitors and choose a height that reduces the occurrence of reflections that
will end up in the prime listening spot. (Figure 4.) In most cases, the ideal position is slightly behind and above
the mixing console's meter bridge.
Setting up the RESOLV 50a
Figure 2.
Figure 3.
Figure 4.
7