Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
KICKSTAND
Use the kickstand on the amplifier's
rear panel to support the unit at an
ideal monitoring angle.
TOP PANEL
6
6
7
7
8
8
5
5
1.
POWER SWITCH – Turns the amplifier on/off. Make sure the MAIN VOL and
HEADPHONES VOLUME knobs are set to "zero" before turning it on. The LED above this
switch illuminates when the amplifier is on.
2.
HEADPHONES OUTPUT – Connect your 1/4" stereo headphones here.
3.
HEADPHONES VOLUME – Turn this knob to adjust the level of the HEADPHONE
OUTPUT.
4.
MAIN VOL – Turn this knob to adjust the amplifier's main volume.
5.
CHANNEL LEVEL – Turn this knob to adjust the level of the corresponding channel.
6.
CHANNEL HIGH EQ – Turn this knob to adjust the level of the channel's high frequencies
(treble).
7.
CHANNEL LOW EQ – Turn this knob to adjust the level of the channel's low frequencies
(bass).
8.
CHANNEL FX – Turn this knob to adjust how much of the currently selected effect is
applied to the channel.
9.
EFFECT PRESETS – Turn this knob to select an effect.
10. EFFECT VARIATIONS – Turn this knob to select different variations of the selected effect.
11. FX LEVEL – Turn this knob to adjust how much of the currently selected effect is applied
to the entire mix.
6
6
4
7
7
9
8
8
5
5
3
2
10 11
3
1
Publicidad
Tabla de contenido
