Compatible Devices - FAAC TM2-R Manual Del Usario

SENSOR TM2 X W
Detects the oscillations caused by wind on the arm structure.
MEMORISING A SENSOR
In order to associate a sensor with the motor, a remote control must have already
been memorised. Turn the selector to position 0 and carry out the following se-
quence:
+
A B
DELETING A SENSOR
To delete the association of a sensor with the motor a remote control must have
already been memorised. Turn the selector to position 0, if the sensor is active wait
for it to switch off and carry out the following procedure:
+
A B
For a complete description of the functions of this device, refer to the instruction
manual included in the package.
TM2 R

COMPATIBLE DEVICES

B
A
29
SET BUTTON
LED
SELECTOR
set
2 sec.
set
2 sec.
A4516_6G66_Rev.A