Sucking Up Asbestos-Containing Substances; Emptying The Container - CS Unitec CS 1445 Manual De Instrucciones

6
If the vacuum cleaner is not switched off, the re-start protection
remains effective. The vacuum cleaner is ready for operation only
after the unit has been switched off and switched on again.
the hose, as a result of the high suction level and the favourable
dust.

5.3 Sucking up asbestos-containing substances

vacuuming asbestos-containing substances.
prevent dust from sticking and becoming incrusted.
For sucking up asbestos-containing substances: Insert the PE
vacuum cleaners for dry dusts.
Guide or clean extracted air in such a way that asbestos
tight containers.
Do not decant dust.
the art without any danger to persons or the environment.
Take additional ventilation measures in accordance with the
state of the art.
After completion of the work:
Carefully clean tools, including suction tubes and work
Carefully clean the working area.
Moisten and properly remove objects contaminated with asbes-
1-800-700-5919 (US/CA)
After cleaning:
NOTE
6
system, which can be used to clean any attached dust from the
other so that continuous work is guaranteed.
NOTE
cleaning during the operation.
operation, even for critical types of dust.
NOTE
WARNING !
7
WWW.CSUNITEC.COM
info@csunitec.com
dif. = 0
dif. = max.

Emptying the container

NOTE
Switch off the vacuum cleaner, pull out the mains plug.
Remove the cover and suction hose from the container.
Empty the container by pouring out.
* depending on model
+1-203-853-9522 (Intl.)