CS Unitec CS 1445 Manual De Instrucciones página 8

8
with light pressure.
9
(see Quick Reference Guide
10
Remove suction hose.
Close off intake socket with cap.
Close the side latches.
Place the accessories in a suitable plastic bag and seal the plas-
tic bag or place it in the tool storage compartment.
Put the suction hose ends together so that no dirt particles leak
out.
Place the hose around the vacuum cleaner and clamp onto the
11
Switch off the vacuum cleaner and pull out the mains plug before
carrying out any maintenance work.
For maintenance by the user, the vacuum cleaner must be
- dismantled,
- cleaned and
- maintained,
as far as possible without creating any danger to the maintenance
personnel or other.
Precautionary measures
Suitable precautionary measures include:
- Cleaning before dismantling
-
cleaner is to be dismantled
- Cleaning of the maintenance area
-
Precautionary measures with vacuum cleaners class H and M
The outside of the vacuum cleaner should be cleaned by dust
extraction procedures and wiped down, or should be treated with
a
1-800-700-5919 (US/CA)
NOTE
Transport
.
Maintenance
NOTE
WWW.CSUNITEC.COM
parts of the vacuum cleaner must be considered to be contaminat-
handling must be used to prevent dust distribution.
Contaminated items
When carrying out maintenance or repair work, all contaminated
of. Such items must be disposed of in impermeable bags in
accordance with the applicable regulations concerning the disposal
of such waste.
11.1 Testing the effectiveness of the vacuum
cleaner
At least once a year, the manufacturer or an instructed person must
vacuum cleaner, and control mechanisms.
In addition, the effectiveness of the vacuum cleaners with dust
AA.22.201.2. If the test is not passed, it must be repeated with a
If the suction power of the vacuum cleaner is reduced and the
and
info@csunitec.com
-
.
* depending on model
+1-203-853-9522 (Intl.)