Shure AXT903 Guía Del Usario página 7

Connecting DC Power
1. Connect the cable from the Shure PS50 power supply to the DC power supply
input.
2. The white LED will illuminate when the PS50 is connected to an AC power
source.
Inserting and Removing Bodypack Batteries
To Insert:
1. Align the battery with the key-way of the charger bay.
2. Press the battery into the charging bay until it locks into place.
To Remove:
Press the release tabs on the sides of the battery and pull back.
Inserting and Removing Handheld Batteries
To Insert:
1. Slide the battery into the charging bay.
2. Press the battery until it locks into place.
To Remove:
1. Press the release button on the front of the charger module.
2. The release mechanism will eject the battery from the charger module.
7