Configuration; General Overview - Fermax VEO XS Guia De Inicio Rapido

CONFIGURATION

FIRST RUN
PREREQUISITES:
1. DOBISS installation already running in standalone mode.
2. DUOX installation (Bin-Bin) already powered on.
STEPS:
1. Connect the VEO XS Ambiance monitor to its wall plate connector.
2. Start DOBISS Aplication in VEO XS Monitor (see section below) . The monitor will automatically
begin to import DOBISS installation .
3. Wait until the monitor enters in DOBISS APP Main screen.
Note: Previous steps can only be done in one single VEO XS Ambiance monitor at the same time,
otherwise the process may fail. In case more than one monitor will exist for controlling the
same DOBISS installation it is recommended to start the process from the furthest monitor
and then repeat previous steps until the nearest one is successfully confi gured.
DOBISS APPLICATION
START THE APPLICATION:
There are two ways to open DOBISS application on your VEO XS Ambiance monitor:
a) Touch the screen while the monitor is in standby mode.
b) Press FERMAX menu button

GENERAL OVERVIEW:

DOBISS APP MAIN SCREEN
and then select "Home automation" icon
1
CONTROLLERS MENU
PAGING SYSTEM
PREV. OUTPUTS
a
3
NAVIGATION MENU
.
4
SHUTTERS SCENARIOS
c
b
2
DUOX VEO XS AMBIANCE MONITOR
NEXT
3
3