Removing The Light Head Assembly - Tennant InstaCure+ Manual Del Operario

EN OPERATION

REMOVING THE LIGHT HEAD ASSEMBLY

The light head assembly can be easily removed
for transporting the machine or changing the light
bulbs.
WARNING: Hazardous voltage. Unplug
power cord before servicing machine.
1. Stop on a level surface and apply the wheel
lock, then unplug the machine.
2. Allow the light head assembly to cool.
WARNING: Burn hazard. Hot surface. Do
NOT touch.
3. Unplug the side lights and disconnect the
power supply from the light head assembly.
10
Home
4. Loosen the light head removal knobs and
remove the light head assembly.
Find... Go To..
InstaCure+ 9006246 (11−2011)