Training Instructions; Planning Floor Coating Application; How The Machine Works - Tennant InstaCure+ Manual Del Operario

EN OPERATION

TRAINING INSTRUCTIONS

This machine is to only be used by Qualified
Professional Trained Operators. Contact your
Tennant Company representative for training.
− Operation of this machine should only be
done in a site that is suitable to protect
persons authorized by the authority
responsible for the location.
− The maximum number of qualified
professional operators that may we within one
foot of the machine during operation is two.
− Use the approved UVA−UVB safety glasses
provided with the machine.
− Use protective clothing as described in the
Important Safety Instructions section of this
manual.
− Refer to Changing Light Bulbs section of this
manual for bulb replacement.
6
Home

PLANNING FLOOR COATING APPLICATION

Before applying the Eco−UVC or Eco−UVI floor
coatings, determine which electrical outlet you will
plug the Instacure+ machine into. Apply the
coating to the floor near that outlet first so that
you can operate the machine without the cord
dragging on the uncured floor. Continue applying
the floor coating working your way across the
room in the same order that you will later be
curing the floor.
NOTE: Refer to the Eco−UVC or Eco−UVI
product bulletin for floor coating application
instructions or contact your TENNANT
representative for advice.

HOW THE MACHINE WORKS

The Instacure+ machine is designed to cure floors
instantly when used with the Eco−UVC or
Eco−UVI floor coatings. It does this by exposing
UV light to the coating which cures this special
coating. This machine is not made for any other
use.
Find... Go To..
InstaCure+ 9006246 (11−2011)