Magic Chef MCSTCW16W3 Manual Del Usuario página 9

QUICK SINK ADAPTOR INSTALLATION
1. Remove the aerator from your faucet nozzle
and determine the size and type of the
faucet (Inside or Outside Threaded).
2. If your faucet is outside threaded (threads
on the outside of the faucet), use the thin
rubber washer in the silver faucet adapter.
If your faucet is inside threaded (threads on
the inside of the faucet), use the thick rubber
washer in the silver faucet adapter. If water
leaks from the connection, use the thin
rubber washer as well.
3. Attach the silver faucet adapter to the sink
faucet.
4. Connect the water inlet hose to the faucet
adaptor by pulling back the collar, pushing
up onto the adaptor, and releasing the collar,
verifying that is securely in place. Be sure to
connect the correct end of the water hose to
the adaptor. A sticker on the hose indicates
which end to connect.
5. Attach the other end of the inlet hose to the
cold water inlet on the washer.
NOTE: Some faucets may require an additional
adaptor not included with the washer.
Faucet
Washers
Faucet Adaptor
Washer
Quick Connector
Washer
Water Inlet Hose
9
Figure 8