Grounding Instructions; Leveling Instructions - Danby Designer DWC110BLSRH Manual Del Usario

IMPORTANT SAFETY INFORMATION
GROUNDING
INSTRUCTIONS
W A R N I N G !
Improper use of the ground-
ing plug can result in a risk of
electrical shock.
Leveling
Instructions
WARNING!
Extreme Weight Hazard
Use two or more people when
moving the wine cooler.
This appliance must
grounded. In the event of an
electrical short circuit, ground-
ing reduces the risk of electric
shock by providing an escape
wire for the electric current.
This appliance is equipped with
a power cord having a ground-
ing wire with a grounding plug.
The plug must be plugged into
an outlet that is properly
installed and grounded.
Consult a qualified electrician
or service technician if the
grounding instructions are not
completely understood, or if
doubt exists as to whether the
appliance is properly ground-
ed.
If the outlet is a standard 2-
prong wall outlet, it is your per-
sonal responsibility and obliga-
tion to have it replaced with a
properly grounded 3-prong wall
outlet.
Beneath the wine cooler there
are two leveling legs that are
located on either side of the
vent. It is important that your
wine cooler is level. To level the
wine cooler:
1. Move the wine cooler to
its final location.
2. Have someone gently lean
on the front of the wine
cooler to take some of the
weight off of the leveling
legs.
4
be For best operation, plug this
appliance into its own electrical
outlet to prevent flickering of
lights, blowing of fuse or trip-
ping of circuit breaker.
Do not under any circum-
stances cut or remove the third
(ground) prong from the power
cord.
Do not use an adapter plug
with this appliance.
Do not use an extension cord
with this appliance. If the power
cord is too short, have a quali-
fied electrician or service tech-
nician install an outlet near the
appliance.
3. Turn the leveling legs clock-
wise to raise the wine
cooler, or counter-clockwise
to lower it. Continue in this
manner until the wine
cooler is level. See Fig. A.
Raises
Fig. A
Lowers