Preparation Before Use - Hkoenig RP2 Manual De Utilización

ENGLISH
Thank you for your purchase of our electric BBQ grill. To use this BBQ properly and safely,
please read the following instructions carefully.

PREPARATION BEFORE USE

1. Take apart the grill plate, small pans and/or granite grill plate, clean with a soft damp cloth.
Place your appliance on the level and stable surface.
2. Check that the voltage marked on the product corresponds with your supply voltage.
Ensure the controller is in the "O" position before plug in.
OPERATION
1. Connect the BBQ to the power supply. Turn the switch from "O" TO "一 " position and the
indicator light is on for working, then pre-heating the BBQ set for 5 minutes.
2. As the different heat of cooking request, put your food on the small pans and place them
under the heating sources. Or place your food directly on the grill plate for the purpose of
grilling.
3. When you have finished using the BBQ, turn the switch to "O" position and unplug it from
the socket. Wait until the appliance is completely cool down before moving or cleaning.
IMPORTANT SAFEGUARDS
1. CORRECT USE OF ELECTRICITY
• To prevent the risk of electric shock, DO NOT USE the
set with broken power supply wires or broken plug. All
repair works must be made by a professional (authorized
distributor). NEVER TRY TO REPAIR the cable or plug
by yourself. Please take the damaged set to your local
authorized maintenance center
• Use of an extension cord is not recommended as it may
overheat and cause risk of fire. However, if an extension
cord must be used, the cord should be 1.0mm
NO.14AWG standard.
• To prevent overloading and blowing fuses, ensure that
no other high power appliance is plugged into the same
socket, or another socket which is connected in the
same circuit.
• DO NOT PUT the cord under the carpet, blankets.
Always keep the power cable away from walkway in
room.
2
or