Usage; Choosing The Appropriate Setting; Suction Release - Shark Rocket AH452W Manual Del Usuario

USAGE

The Shark Rocket Powerhead has a 2-speed POWER slider switch on the handle.
® ®
The Motorized Floor Nozzle is equipped with headlights that illuminate the floor surface being cleaned. The lights turn on in either speed
setting.
LO
Brushroll spins slowly

CHOOSING THE APPROPRIATE SETTING

Deep Clean Carpet Brushroll
• LO - For gentle on hard floors and area rugs
• HI - For deep-cleans carpets by removing embedded dirt
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use
the carpet brushroll on HI setting with the SUCTION CONTROL closed.
1 Plug the unit into an electrical outlet.
2 Slide the POWER switch to the LO position to gently clean hard floors and
area rugs. The Brushroll will spin slowly.
3 Slide the POWER switch to the HI position to deep-clean carpets by
removing embedded dirt. The Brushroll will spin quickly.
NOTE: Before vacuuming your delicate area rugs or carpets, refer to the
manufacturer's recommended cleaning instructions.

SUCTION RELEASE

This unit has a Suction Control Button to help
with push and pull on high-pile carpets and to
release suction when vacuuming area rugs. Open
to minimize suction. Be sure to close again for
maximum suction.
5
Gentle Touch Hard Floor Brushroll
• LO - For large and heavy debris pickup
• HI - For loose and stuck-on dust and debris
1 Plug the unit into an electrical outlet.
2 Slide the POWER switch to the LO position to clean large and heavy
debris. The Brushroll will spin slowly.
3
Slide the POWER switch to the HI position to clean loose and stuck-
on dust and debris. The Brushroll will spin quickly.
NOTE: The brushroll will not spin unless the Telescoping Wand is reclined.
Less Suction
open
www.sharkrocketpowerhead.com
HI
Brushroll spins quickly
More Suction
closed