Preface; Introduction; Identification Of The Product; General Description - PLYMOVENT MobilePro Manual De Instalación Y De Uso

PREFaCE

Using this manual
This manual is intended to be used as a work of reference for
professional, well trained and authorised users to be able to
safely install, use, maintain and repair the product mentioned
on the cover of this document.
Pictograms and symbols
The following pictograms and symbols are used in this manual:
TIP
Suggestions and recommendations to simplify
carrying out tasks and actions.
aTTENTION
A remark with additional information for the user. A
remark brings possible problems to the user's
attention.
CaUTION!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop or
the environment.
WaRNINg!
Procedures which, if not carried out with the
necessary caution, may damage the product or
cause serious personal injury.
CaUTION!
Denotes risk of electric shock.
WaRNINg!
Fire hazard! Important warning to prevent fire.
WaRNINg!
Explosion hazard! Important warning to prevent
explosions.
Personal protective equipment (PPE)
Instruction to use respiratory protection when you
do service, maintenance and repair jobs, as well as
during functional testing. We recommend to use a
half-face respirator according to DIN EN 141/143,
protection class P3.
Personal protective equipment (PPE)
Instruction to use protective gloves when you do
service, maintenance and repair jobs.
Text indicators
Listings indicated by "-" (hyphen) concern enumerations.
Listings indicated by "•" (bullet point) describe steps to
perform.
Service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. He will always be willing to
help you. Make sure you have the following specifications at
hand:
- product name
- serial number
You can find these data on the identification plate.
Product indications
Unless specifically stated, the contents of this manual applies
to the MobilePro as well as the MobilePro/PTFE.
0000104750/210616/B MobilePro | MobilePro/PTFE
1

INTRODUCTION

1.1

Identification of the product

The identification plate contains, among other things, the
following data:
- product name
- serial number
- supply voltage and frequency
- power consumption
1.2

general description

The MobilePro is a mobile filter unit with integrated fan that
provides extraction and filtration for use with an extraction
arm. It features a cylindrical polyester filter cartridge. The unit
is fitted with a RamAir™ pulse amplifier for cleaning of the
filter cartridge by compressed air. Dust collection in the dust
tray at the bottom of the unit. Thanks to the four transport
wheels (two of which are swivel casters with brake), the
MobilePro is suitable to be used in relatively small facilities or
near sources of pollution without a fixed location. The versatile
handlebar allows to place tools on the unit and prevents them
from falling off.
1.3

Product combinations

To operate the unit, selection of one of the following products
is required:
Ball-bearing extraction arm (360° rotatable):
- KUA-2/S | 2 m (6.5 ft)
- KUA-3/S | 3 m (10 ft)
- KUA-4/S | 4 m (13 ft)
Hose tube extraction arm (360° rotatable):
- EA-3/S | 3 m (10 ft)
- EA-4/S | 4 m (13 ft)
1.3.1

Options and accessories

The following products can be obtained as an option and/or
accessory:
- CART-OA | 100% BiCo polyester filter cartridge, anti-static
(instead of CART-O)
- HL-20/24-160 | Halogen working light with switch box (arm
359° rotatable)
- EFC | Detergent to wash the filter cartridge
1.4

Technical specifications

Physical dimensions and properties
Material (housing) electro-zinc coated steel
Weight 169 kg (373 lbs.)
Capacity of dust tray 10 litres (2.6 gallon)
Filter cartridge
MobilePro
Type CART-O
Filter material 100% BiCo
polyester
Filter surface area 20 m² (215 ft²)
Dust class (according to M
DIN EN 60335-2-69)
Filter class (according to MERV 11
ASHRAE 52.2)
Washable (e.g. by using yes
Plymovent EFC detergent)
Compressed air system
Required compressed air dry and oil-free according to ISO 8573-3
quality class 6
MobilePro/PTFE
CART-O/PTFE
100% BiCo
polyester with PTFE
membrane
10 m² (108 ft²)
M
MERV 16
no
EN - 3