TFA 60.2015 Instrucciones De Uso página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
TFA_No. 60.2015_Anl_03_21
Alarm clock with indoor climate
• Unauthorized repairs, modifications or changes to the product
are prohibited.
Caution!
Risk of injury:
• Keep this instrument and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swal-
lowed. If a battery is swallowed, this can lead to serious inter-
nal burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to pre-
vent damage caused by leaking. Never use a combination of old
and new batteries together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses
when handling leaking batteries.
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations
or shocks.
• Protect it from moisture.
5. Elements
A: Display (Fig. 1):
A 1:
Time/date/alarm time
A 2:
Weather symbol
A 3:
Alarm symbol
A 4:
Day of the week
14
24.03.2021
18:07 Uhr
Seite 8
Alarm clock with indoor climate
A 5:
Comfort level
A 6:
Humidity
A 7:
Temperature
B: Buttons (Fig. 2):
B 1:
MODE button
B 2:
UP button
B 3:
DOWN button
B 4:
MAX/MIN button
B 5:
LIGHT/SNZ button (on the top)
C: Housing (Fig. 2):
C 1:
Battery compartment
6. Getting started
• Open the battery compartment and insert three new batteries
1,5 V AAA. Ensure that the battery polarities are correct.
• The device will alert you with a beep and all LCD segments will
be displayed for a short moment.
6.1 Note:
• For better adjustment of the device, press the LIGHT/ SNZ button
to turn on the backlight for 8 seconds.
• As soon as the backlight turns off, first press the LIGHT/ SNZ
button and then the setting button.
7. How to operate
7.1 Setting of the clock
• Press and hold MODE button for three seconds in the time
mode.
• The hour digits will be flashing.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido