The LEDs
Look at the front panel LEDs. When
you connect the power, the PWR and
WLAN (P-335WT) LEDs come on.
The LAN and WAN LEDs turn on if the
corresponding connections are
properly made. The USB LED turns on
if a USB device is connected.
2 Accessing the Web Configurator
1 Launch your web browser. Enter "192.168.1.1" as the web site address.
Note: If you do not see the next screen, then please go to section
2 The Password window displays. Enter the
password ("1234" is the default) and click Login.
3 Change the password in the screen that follows
and click Apply.
ENGLISH
5.1
4 Click Go Wizard setup and click Apply to set up
your Prestige for the first time.
5
.